Outcasts United: A True Story about Soccer and Immigration Made for Hollywood Essay

Rhetorical Analysis of â€Å"Outcasts United: A True Story about Soccer and Immigration Made for Hollywood? Pitch Invasion journalist, Andrew Guest, writes the article â€Å"Outcasts United: A True Story about Soccer and Immigration Made for Hollywood† from a sarcastic viewpoint. Guest starts by allowing his reader to get acquainted with Warren St. John’s cover article on â€Å"Outcast United,† which later became a book. He introduces the awestruck fact that Universal Studios wants to pay St. John and his main character, Luma Mufleh, $3 million to create a corresponding film to â€Å"Outcasts United. Guest then debates the question of why youth soccer appeals to Hollywood so much. He is concerned that their story will not be as serious, nor will it offer unity and enmity just as the original story did. Guest’s second worry is that St. John’s book version is nothing but a work of heartfelt journalism, instead of what he thought would be â€Å"more lighthearted† (par. 5). Andrew Guest does not build on ethos and there is very little logos, but does formulate his opinions through pathos, word choice, and tone. Guest wants to lure the audience whom has read â€Å"Outcasts United: An American Town, a Refugee Team† and that are familiar with it. He uses strong pathos to persuade the readers more closely. For example, Guest says, â€Å"But I was also worried that the real appeal here was the kind ‘heartwarming’ pabulum so often associated with the popular sports media†¦Ã¢â‚¬  (par. 2). He wants the reader to feel that Hollywood’s intentions may not be what they are expecting just as well as he does. Furthermore, he explains that the story answered his questions but did not stop his worrying. Guest also uses pathos in his repetition of â€Å"heartwarming† (par. 7) to reveal how the truth would really be portrayed by Hollywood. A cliche, such as this, would make the readers question whether Hollywood is sincere in what they are trying to do. Another strategy Guest uses to strengthen his stand point is his unique word choice. The way he catches the reader’s eyes and ears is by articulating his thoughts into strong opinions. He accomplishes this by explaining, â€Å"The game distracts people just enough that they are willing to reveal things about their inner lives and thoughts that they might not reveal over a cup of coffee† (par. ). His opinion makes the audience see that sports alone causes people to be more vocal about things they never thought they could actually say. Guest then uses the word â€Å"pabulum† to create a bolder statement in his argument that Hollywood’s intentions are only to nourish sports media in a way that would make society more sympathetic to the stories. In addition, Guest uses a vivid sarcastic tone in his article when referring to â€Å"Outcast United. † This tone is to exemplify how â€Å"heartwarming† continues to define soccer and the way it is socially connected with the popular sports media today. He supports this by sarcastically stating, â€Å"†¦look, world peace really is possible if we just learn the life lessons soccer has to teach us† (par. 2). However, Guest really feels that soccer only makes a difference to a certain extent. Guest goes on to say that it always surprises him when someone claims that soccer is a great force that draws people together. He acts as if he is in shock, when in reality he does not agree with that universal view. In fact he believes the complete opposite. His sarcastic tone weakens the article because sometimes that is the opposite of what the reader is looking for. Although Guest supports his appeals and gets his points across to the reader, he does not build much credibility as an expert on the subject. There was no ethos found throughout the article. Guest’s career is partially understood, and is not fully elaborated upon. He speaks on sports, Hollywood, and society throughout the article. However, Guest is not a sports fan, and this he supports by bluntly stating, â€Å"And while I don’t actually think of myself as a particularly obsessive sports fan or certainly not as a sports writer†¦Ã¢â‚¬  (par. 6). He is not a movie critic or socialist of the matter. He makes a great debater, but what has he shown about his personally? Has he played any sports? Why should one agree with what he believes, and not what they believe? Credibility is what increases the effectiveness of the article, not opinion alone. Andrew Guest succeeds in telling his readers his viewpoints on this book and on his social beliefs. He uses strong pathos, bold word choice, and a firm tone. He has built on little ethos and logos, which causes his article to be less effective. Guest career is never states throughout the article about his career or supports any of his opinionated arguments.

Curriculum Integration

Curriculum integration  has been identified among the most revolutionary pedagogical strategies in the interdisciplinary approach to education. Julie Thompson Klein (2006) explained that in curriculum integration,  Ã¢â‚¬Å"Disciplinary and subject boundaries are blurred and connections magnified†¦Integration becomes the purpose of education, not simply a tool. In student-centered curricula, the students’ worlds, not a school- or government-mandated syllabus, become the heart of learning.Students even participate in selecting the themes and problems they will study, and they often work together collaboratively. †Ã‚  (Klein 2006, p. 14). Educators first explored the concept of integrating curriculum in the 1890s. Over the years, there have been numerous educational researchers, e. g. , Susan Drake, Heidi Hayes Jacobs, James Beane and Gordon Vars, who have described various interpretations of curriculum integration, referring to the curriculum as interwoven, connect ed, thematic, interdisciplinary, multidisciplinary, correlated, linked and holistic.Many educators, e. g. , Robin Fogarty, go beyond a single definition of curriculum integration and view it instead as a continuum. Furthermore, curriculum integration aims to improve students’ interdisciplinary understanding, defined as  Ã¢â‚¬Å"the capacity to integrate knowledge and modes of thinking in two or more disciplines to produce cognitive advancement – e. g. explaining a phenomenon, solving a problem, creating a product, raising a new question – in ways that would have been unlikely through single disciplinary means. †Ã‚  (Klein 2006, p. 5) While the true origins of the theory of integration are numerous and wide-ranging, a general consensus identifies the work of German educator Johann Herbart (1776-1841) as the â€Å"germ† of the modern integration movement. From Herbartian beginnings, the first half of the twentieth century saw a development of curricu lum integration through the project approach, core curriculum movement, and problem-centered core curricula (Klein 2006). Each involved varying levels of priority shifting from separate subject knowledge acquisition to problem-solving experiences that integrated disciplinary learning.That period also reflected the influence of John Dewey’s views on the social purposes of education. Educators interested in integration began to consider the school’s role in expanding democracy and encouraging the development of values and skills necessary for the â€Å"common life. † (Beane 1997) Beane (1997) defined curriculum integration as  Ã¢â‚¬Å"curriculum design that is concerned with enhancing the possibilities for personal and social integration through the organization of curriculum around significant problems and issues, collaboratively identified by educators and young people, without regard for subject area boundaries.   (Beane 1997, p. x-xi) Teachers who adopt thi s kind of curriculum have to make several shifts in the traditional teacher-student relationship, such as sharing decision making with students, focusing more on student concerns than predetermined content guidelines, learning along with students in unfamiliar areas, and taking student constructions of meaning seriously. The upside to taking on such a challenging role is the improved relations with students in these classrooms.By placing students at the center of all learning endeavors, these teachers tend to have fewer curricular conflicts and classroom management issues. (Beane 1997) Curriculum integration is clearly far from taking the easy road, but it may well be worth it. Curriculum integration can be described as an approach to teaching and learning that is based on both philosophy and practicality. It can generally be defined as a curriculum approach that purposefully draws together knowledge, skills, attitudes and values from within or across subject areas to develop a more powerful understanding of key ideas.Curriculum integration occurs when components of the curriculum are connected and related in meaningful ways by both the students and teachers. Curriculum integration is more than a clustering of related learning outcomes. The selection of learning experiences should be based on the extent to which they promote progress or broaden and confirm understanding. There is no one best way to integrate the curriculum; however, the following key requirements should be met for successful integration.

Explanatory Essay on Horticulture

The world would not be the same without these people and these labor-Intensive positions wouldn't be nearly as unofficial without the application of Horticultural practices. Horticulture has been the heart of humanity since the dawn of civilization, what else could bring people to depend on each other than the essentials of life, food and water. Horticulture has always provided food and water to the masses from the first hunter-gatherers to today's corn farmers.These examples are very different from each other but embody the same values. Some common entry-level jobs in the Horticulture industry that will be available to me after graduating are lawn care specialist, golf course attendant, landscaper, city and county work, and greenhouse attendant. There are countless more entry-level positions available I just named a few of the popular choices. Other than the satisfaction of providing a fruitful service to society Horticulture can help you grow on personal levels.Providing you with a n active lifestyle that pays dividends, Horticulture is a healthy way to make money. A horticulturist will have learned patience and developed a higher value of time management while on the lob. The study also gives me the tools to provide food for myself and someday my family. Never will I completely depend on others to nourish me. In conclusion between the sheer amounts of career opportunities along with personal growth I see nothing but positive outcomes from acquiring an Associates Degree in Landscape, Plant, and Turf Management.In Just two short years I will have an education I can trust to provide me with a comfortable Income, the knowledge to feed my community, and the ability to beautify the world around me using material provided by the earth. Whether In times of trouble or prosperity there will be a need for Horticulturists. The Green Industry will never disappear, but only become more chemical, with advances In science and medicine ever on the horizon the need for me and students like myself to be providing material will never cease.With rolling world populations a steady food supply and dwindling natural settings have never been more Important. Word Count: 424 Words Explanatory Essay on Horticulture By onionskin career or a great backup plan to your primary career choice. Most Jobs in the Green Industry are relatively concrete positions within society such as farmers, landscapers, without these people and these labor-intensive positions wouldn't be nearly as ACH other but embody the same values. Some common entry-level Jobs in the attendant.There are countless more entry-level positions available I Just named a job. The study also gives me the tools to provide food for myself and someday my an education I can trust to provide me with a comfortable income, the knowledge to provided by the earth. Whether in times of trouble or prosperity there will be a need technical, with advances in science and medicine ever on the horizon the need for me and stud ents like myself to be providing material will never cease. With rising been more important.

Describe the roles of amino acid R-groups to the transmembrane Essay

Describe the roles of amino acid R-groups to the transmembrane channels that allow passage of molecules and ions across lipid bilayers - Essay Example On the other hand, the hydrophilic amino acids are usually established on the outside of proteins and in the lively cores of enzymatically lively proteins. This means that the natural world of some amino acid R-groups permits enzyme reactions to take place. The imidazole ring of histidine permits it to function as either a proton contributor or acceptor at physiological PH. Therefore, it is mostly discovered in the hasty heart of enzymes. Hemoglobin is the best example of membrane channel that plays a vital role in movement of molecules and ions. The aptitude of histidines in hemoglobin is responsible for cushioning the H+ ions ionization of carbonic acid in red blood cells (Berg, Tymoczko and Stryer 55). This is the main factor of hemoglobin that that permits it to swap over O2 and CO2 at the tissues or lungs respectively. The most influential alcohol of serine and threonine in addition to the thiol (-SH) of cysteine, permit these amino acids to take action as nucleophiles throughou t enzymatic catalysis. Moreover, the cysteine thiol is capable of developing a disulfide union with other cysteines: From the chain above, the easy disulfide is recognized as cystine. The development of disulfide unions between cysteines available within proteins is significant to the development of lively structural spheres of influence in a huge number of proteins (Berg, Tymoczko and Stryer 60). The process of disfulfied union between cysteines of distinct polypeptide chains of oligomeric proteins performs a significant function in commanding the structure of complicated proteins such as the insulin receptor. All the above mentioned processes takes place in membranes and the fact that certain little molecules go through easily while others find it hard to go through makes the membranes of the R groups to be considered selectively permeable (Berg, Tymoczko and Stryer 67). This is because when several sugars of equal molecular size are available both

Globalisation and Integration (clothes industry) essay Outline

Globalisation and Integration (clothes industry) essay - Outline Example disinterest, imbalance in the economic structure and downfall of local industries often remain unnoticed in the race of trendiness and fashion craze in the clothes industry (Graziani, 1998). Globalization and integration in the cloth industry has pushed back local manufacturers of textile products and has also augmented the trend of child labor in the development countries (Ramdass & Kruger, 2011). Tough, the evolution of technology and trade liberalism has benefited many companies, but there always remain a darker side of it which should be addressed to make it a truly beneficial industry for small enterprises and individuals too (Graziani, 1998). A common practice today in the cloth industries is the use of media for brand promotion. This is also the fruit of globalization and integration in businesses, which has shown enormous tools to reach the market first. This has increased customer awareness about all latest brands and design in the market and has given more flexibility in customer’s choice. Moreover, companies have been able to market internationally due to the technological enhancement which brings all the people at one common platform (Jan, 2009). The use of billboards’ advertisements and promotion through magazines, and social media gives more hype to the brand name and builds customer motivation. However, the matter of concern arises when the company charges extra to customers for covering their heavy expenditures of marketing and advertisements. Therefore, the same quality of product is then available at much higher prices than its actual cost (Jan, 2009). Taking parallel the rising competition in the market, companies cannot keep a big margin of profit in their textile products and thus chooses ways of child labor and minimal health precautions to reduce their overall expenditures. The term relocation has become very common in the cloth industrial, where a company takes services from developing and low economy countries for cheap labor

Critique for "the piano lesson" play at stagehouse theatre Essay - 1

Critique for "the piano lesson" play at stagehouse theatre at grossmont college - Essay Example In The Piano Lesson, Esther Skandunas provides the costume design. Danielle Dudley sets the stage for the play. The stage manager is Aimee-Marie Holland. On the stage is an antique piano directly under an ancient painting. A stool covered with an old tablecloth stands in front of the piano. A sofa faces the audience just behind the piano. There is a kitchen and a wall clock hung above the cabinet. In the center of the stage are dining chairs and a table. On the table are four glasses with whisky. A staircase leads to an upper room. The piano is the major prop located in a place from where we refer all other items. It is the artifact in which all the family history is enshrined. The setting was in the 1930s. The piano is customized with the curving of the owner which indicates a strong connection of this item and the central theme. This arrangement of the stage suffices all the activities in the play that convey different themes. Some of the ideas are not well displayed in the stage design applied. Superstition is a theme in this play. We expect the stage to be equipped with props that suit this theme like caskets or smoke emanating from one corner of the stage. The lighting design was provided by Craig Everett. It is partly produced by a bulb hanging from the ceiling of the stage emitting yellow light. Blue light comes from a bulb directly above the audience. The lighting patterns in this stage help emphasize the theme. Supernatural powers apparent in this play are illustrated by the blue light that is visible even outside the room. All the scenes were lit all the time. If the stage was darkened at times when the spirits were say talking, the show could be livelier and express some fears in the audience at the thought of ghosts’ visitation. The question of Family history is well captured in the play. The piano is a family souvenir that reminds it of its historical legacy. Two characters, particularly bring out the issue of historical legacy, and

Philosophy of Small Groups Research Paper Example | Topics and Well Written Essays - 1250 words

Philosophy of Small Groups - Research Paper Example Wilson (2003) states that the importance attached to small face to face groups within the congregation is what allows many church members to personalize their contribution.1 The small group is the starting relational unit which is beyond family where ministry to one another starts, it is the arena of primary care. A small group is a highly effective means of individuals entering the spiritual growth process. It is made up of 5-10 members who get together weekly with the specific purpose of growing personally and spiritually. It entails open mindedness and encourages honesty in all aspects. Thus, the primary way to be connected in churches is through the small groups. The fruit of entering the spiritual growth process is one of the greatest things that people may have anticipated. According to Djupe (2006), feeling similar to other members in the church small group is positively related to practicing skills, confirming the importance of incorporating a social dimension into theories posting an organizational influence on individual behavior.2 One of the most fundamental steps for a small group ministry is developing a personalized philosophy of the ministry. This mainly entails defining priorities, defending actions and determining the next steps to take for the upward success of the individual’s personal life. The philosophical distinctiveness of churches differ with the churches core values, but all aim at ensuring the goals of the small groups are taken into consideration and that they are effective and beneficial for all the members involved in a particular group. The four-session trial period is one of the philosophies and this mainly entails people having a four meeting trial period in a particular small group. Thus if the small group does not satisfy an individual’s need, then one is likely to seek another group but this involves no hard feelings. Another philosophical detail can emanate where the

People Environment and Business Essay Example | Topics and Well Written Essays - 750 words

People Environment and Business - Essay Example This confirms that natural resource exploitation has the capacity to cause imbalances in ecosystems as wells other effects, which may not be reversible. This informs this study on possible environmental effects that Iran experiences in the process or because of exploiting oil. General issues that are of concern to Iran have been vehicle gaseous emissions, operations by refineries as well as effluents by industries, which together contribute towards air contamination, water sources pollution as well as general environmental degradation. For instance, the city of Tehran in Iran ranks among the most polluted cities across the globe. Among other major environmental concerns, that are of great importance and which are being analyzed in depth are issues of environmental pollution from exploitation of oil as a natural resource in the country (Narimisa and Basri, 334-337). The world is increasingly in need for oil and associated products, which causes the rate of exploitation of this natural resource to increase as days go by. The ever-increasing uses into which oil is put into raises the demand of this non-renewable resource. It is widely used for industrial purposes, as a source of fuel to both domestic users as well as industries, in production of electricity as well as for locomotives, which accounts to the highest use into which oil is put. In studies on assessment of social impact associated with exploitation of oil in Iran this study projects future affects the environment in continued exploitation of the resources. Iran is however ranked among the great producers of oil and has amassed great economic wealth through the exploitation of oil globally. In concentrated efforts to study the case in Iran, we investigate oil refinery at Tehran, which has major environmental effects on emissions of gasses, solid wastes, industrial effluents, odor, aesthetic and visual complains as well as noise. However, it is worth understanding that the case study of Tehran oil refini ng is a representation of many other industries within the larger Iran. Air pollution within the country as associated with oil exploitation result from firing processes, furnaces, steam boilers, compressors as well as distillation towers among many others. The major air pollutants from oil exploitation and refining include carbon oxides, oxides of nitrogen and sulfur, ammonia as well as hydrocarbons among others. Water pollution emanates from discharging of the industrial effluents into the water sources either directly or indirectly through contaminating underground water, which later contaminates the surface waters. The process of producing sludge, coke, cracking as well as the process of separation of water and oil produces solid wastes which without proper disposition results to degradation of the environment. Over and above all the adverse effects on environment, that exploitation of oil in Iran brings about is the demolition of ecosystems. Evidence shows that the exploitation causes mass marine as well as land environment degradation through excavations, which are associated with destruction of aesthetic value of the country. In conclusion, despite

Leaders and policy makers - making tourism more sustainable Research Paper

Leaders and policy makers - making tourism more sustainable - Research Paper Example I declare that this assignment is all my own work and the sources of information and material I have used (including the internet) have been fully identified and properly acknowledged as required in the referencing guideline given in the Course Handbook which I received. Groupwork: all members should be identified at the top of this form, but only one member need submit the work. Please clearly indicate the name/letter of the group. Approval for Extended Submission: Approved Extension Date: (to be completed by the Programme Leader) Contents Contents 3 Eccardt, T. 2004, Secrets of the Seven smallest states of Europe: Andorra, Liechtenstein, Luxembourg, Malta, Monaco, San Marino and Vatican City. Hippocrene Books. 21 1. Introduction: This research paper â€Å"Leaders and Policy Makers- Making Tourism More Sustainable† will explore the impacts of policies and leadership capabilities on making tourism sustainable. The country chosen in this case study is Malta. The reason behind t he selection of this industry and this country is because the researcher belongs to Malta, and has ample experience in this industry. Tourism is a very important industry and plays an extensive and lucrative role in the economy of any country. The countries which have explored and utilized their own tourism potential are leading the economic charts today all around the world. Analysis of economically developed and developing countries especially those which have a very high per capita income shows that most of these countries have efficiently developed tourism industry at home. Tourism brings foreigners which ultimately lead to increased foreign exchange which is one of the most important indicators of a developed country. For example, Switzerland which is 133rd largest country in the world area wise has 4th highest per capita income figures in the world. Although the economy of Switzerland is very strong and has been persistent over the time but their real source of economic stabil ity and contribution comes from the well developed and lucrative tourism industry. The flourishing GDP of Switzerland is the result of well developed and organized tourism industry. (Aminu, 2009). Tourism industry in Malta can also bring huge foreign capital and foreign exchange to Malta with ample economical benefits. Malta has the tourism potential and can make the best use of it if policies are planned carefully. Tourism industry can be most beneficial if it is developed on a plan that would ensure the future sustainability. Leaders and policy makers can play a very positive and important role in developing a successful, lucrative and sustainable tourism industry. Planning sustainable tourism carefully can lead to sustainable tourism and regular growth of GDP through decades. This is what the policy makers must keep in mind while planning milestones and policies of any industry (Gupta, 2008). This report is based on secondary data. A lot of data has been studied to come up with t his research report. Analysis of the situation has been done on the basis of existing policy documents. Malta’s climate and sea remain the primary reasons why tourists flock to this resort. A natural harbor present in the island, offering significant protection to naval vessels, has enhanced Malta’s strategic location for any conqueror that seeks to dominate the Mediterranean Sea. Romans, Normans, Arabs, British and

Inquiry 3 Essay Example | Topics and Well Written Essays - 750 words

Inquiry 3 - Essay Example I worked in the Treasury department which was a division of the Finance wing of the organization. Like any other organization, there were diverse cultures, races, beliefs and races, who worked in the organization. During my internship, I was afforded the chance to interact with a host of different people, with different views on life and the way the organization should be run. I had both bad and good experiences but I don’t think I will be able to forget my first day. Since it is a local bank, my internship was not exactly accorded to me through the proper channels. In fact, I think the main reason that I was given the opportunity, despite my impressive academic achievements, was the fact that my father previously worked as the branch manager of that branch and still had some contacts in the organization. Anyway, the world is run on strong social contacts and I guess I had that as an advantage. At the back of my mind, I thought that the internship would be a casual affair with no need for formal attire. Therefore on my first day, I showed up at work in a semi-formal fashion, no tie and no coat and you can imagine the surprise on the security guard’s face when I told him I was an employee. He must have thought I was a visitor or the son of one of the employees in the branch. At the entrance of the Finance division, I was ushered into a cubicle with two short African American gentlemen, who calmly enquired about my academic performance, my social lifestyle and gave me a quick orientation regarding the workings of the organization. They were very helpful and very friendly, with calm reassuring demeanors which I frankly found to be nothing similar to the stereotypes of African Americans, which perceives them as being loud and aggressive. They even jokingly warned me to look out for certain people who they quoted as being ‘nothing but trouble†. I could tell that they were the jokers of the office due to the informal set up of the

Responding to Dark Waters Essay Example | Topics and Well Written Essays - 1250 words

Responding to Dark Waters - Essay Example Just as the title suggests, the essay presents the dark side of civilization in Bogalusa as a representative of situations in the entire globe. This response paper will analyze the article critically and unravel these dark sides. The author chose an appropriate title for this piece of work. No other title would efficiently convey the themes of the essay in only two words. The author succeeds in revealing all types of poisoning in Bogalusa that made all waters dark. Bogalusa has both white and black residents who do not trust each other (Komunyakaa 108). The whites have gained dominance over the men of color. The men of color in this region have limited opportunities in every sector (99). The author offers much imagery that describes the situation of the men of color in this region. The reader cannot help but empathize with the men of color living in Bogalusa. The author does not exaggerate things because the American history in the years mentioned tell it all. Men of color have been struggling to attain equality and inclusion. The essay elaborates all forms of environmental pollution evident in Bogalusa. There are all forms of pollution in the city. There are numerous air explosions, water pollutions, and deforestation. Rivers and ponds in the region have toxins from continuous pollution. There are no interventions to curb environmental degradation. The numerous descriptions and poems help the reader understand the real situation of environmental degradation in Bogalusa. The author paints a realistic concept in the mind of the reader through the vivid illustrations, poems reflecting the nature and references to his opinion. The author expresses his feelings about the condition. It is obvious that he sees horror in Bogalusa. He wishes everything were reversible to return nature into the original state. The poem ‘Fog Galleon’ depicts the real situation of things in Bogalusa (106). Through the author’s image, the reader gets to understand the s ituation. In addition, the author illustrates the effects of environmental degradation to man. He mentions the development of cancer, respiratory diseases, and death. By highlighting these effects, he drives the reader to understand the fact he mentions at the end of the essay that as long as humans do not conserve the environment, they will definitely face negative consequences. Komunyakaa sums it up by saying that ‘hurting nature wounds human beings’ (111). This fact receives a lot of support from the essay. All negative effects towards the environment eventually affect the welfare of man either directly or indirectly. The changing global climates in the recent past serve as further support to the author’s allegation. Humans have brought doom to themselves through activities that are destructive to nature. The reader can clearly understand what the author implies when he says that man and nature exist in connection. Komunyakaa exposes an additional reality of m atters. Governments are reluctant to enact laws that act as guidelines to environmental protection. Louisiana is a clear example of what majority of government sectors are doing. It was becoming obvious that the prevailing environmental conditions needed intervention. However, the officials were doing nothing about it. Through this, the author introduces a new idea about racism trends in American states. States inhabited by majority blacks were likely to be home to multiple companies releasing numerous toxic

Analysis of Class, Status and Power Essay Example for Free

Analysis of Class, Status and Power Essay Karl Marx and Max Weber are among the famous theorist who formed the pillar of the study of society. This come about in their contradict theories the conflict and protestant ethic respectively. It is understood that these two people lived in different eras, Marx being exposed to conditions and perspectives of the eighteen century whilst Weber dwells in the nineteen century where noticeable changes on the fast emergence of innovative technology, and a path where modernity take its toll (the industrial revolution) (Tui, 2014). The theories of Marx and Weber were applicable in their times with regards to the type, functions and interactions existing within society. As follows is the discussion of their main arguments on the contrary of their perspectives on the basis of society. According to Karl Marx, society of all hitherto is the result of social stratification and conflict. The organized economic activities and mode of production, determined the division of labor which causes the formation of two classes, the bourgeoisies and the proletariat (the rich and the poor) showing opposition (antagonistic interaction). The proletariat (working class) controlled the modes of production while the bourgeois owned the means of production (Brym Lie, 2007). The conflict theory by Marx, argued that a position in a productive system is the basis of peoples conflict. The rich attained privilege of accessing revenue and surplus whilst the poor did not resist, but remained subordinate. The bourgeois also maintained their interest by suppressing and maintaining the subordination of the proletariat (Worsley, et al., 1970). A revolution originated on the fact that men realized how capitalism deprives them of self-independence and freedom. Capitalism also increased inequality within society and enhanced further subordination of the working class. Marx believed that in the future there will be classless societies ( (Worsley, et al., 1970)). Therefore modern society is the result of the breakdown of the feudal system; the proletariats were being absorbed by the bourgeois to work in their factory, hence bringing so ciety to the end of communism (Tui, 2014). But also a classless society still experienced antagonistic, a trend of dependency between these two class, that is the bourgeois depend on the manual labor and productivity of the proletariat and vice versa, for their stability and co-existence. In contrast, Weber, in his theory, the protestant ethics, believed in hard work, personal achievement and motivations. It focuses on  individual actions and most importantly an individual’s knowledge and skills to bring about transformation of new society. In other words people consciously making decision at important times or junctures (Tui, 2014). People whom abided to protestant ethics and maintain the spirit of capitalism succeeded economically. He emphasized the importance of the growth of the service sector of the economy, with its many non-manual workers and professionals. He also articulated that capitalist development was not just caused by favorable economic conditions but religious beliefs also plays an important role (aw areness to the society of values and virtues: right and wrong) of facilitating great capitalist growth. He argued that Marx, fails to see that people in society can improve their condition in terms of education, technology to attain a better standard of living. Weber, also showed the flaws of the Conflict theory whereby he said that a revolution is not necessarily the solution to dissatisfaction and grievances. There are medium of resolving matters peacefully whereby the government is required to improve such conditions (Weber, 2005). In light of the above arguments, there is also controversy and contradiction in their discussion of class (created by eligibility and accessing to product of economy), status (social honor or professional position) and power (the ability and opportunity to control) (Worsley, et al., 1970). According to Marx, in society, there are two distinct classes: the bourgeois and the proletariat. These classes were inherited and there is nothing that can be done apart from revolution that can make the differences. The revolution would result in a classless society w here the state come to own the means of production. According to Marx, whoever has a class will have a complimentary standard of status and power. For him class is the originator of all kinds of status in society and source of power. He also stated that traditional status ascribed was used to acquire power such as the members of the noble family were born and entitled to rule. This class of nobles subsequently has high social status (Brym Lie, 2007). Weber strongly argued that class, status and power were three totally different categories. Status and power were achieved through ones commitment and successes. It favored the concept of meritocracy which allows people to rise or fall to a position that matches their talent and efforts ( (Brym Lie, 2007)). All of these were independent of each other. It is not necessary of an individual  or group of people in high class to have a corresponding level(s) of status and power. In general, class is directly related to how people have access to part of the society’s resources. Class should be related to your ability to buy power or your market position (Tui, 2014). Such as a proletariat can become a very important figure in government just because of his/her qualification, oratory skills and achievement. For example a Chief Executive Officer (CEO), commissioner of police, captain. These people worked their way like every proletariat from scratch and because of their ambition and hard work they are able to become successful, even though they do not have a royal or ruling background After having compared the two theories of Karl Marx and Max Weber, the latter theory of protestant ethic and the spirit of capitalism by Max Weber is considered the best and useful theory to understand and explain the dynamics of my local society. Kiribati society is an example of an egalitarian society whereby people are equal and have the same rights and opportunities. The decision making process and access to government’s resources and all opportunities are carried out following established processes and procedures. Everyone is given a chance to talk for themselves or by a representative (Teitiniman, 1993). As mentioned earlier, access to opportunities are open to everyone such as position in government and non-government organization through advertisement. Eligible candidates announced and a screening test is conducted to screen out best candidates. It takes one’s effort, hardship and commitment towards professional development in order to improve life conditioning, status and attainment of power for example people acquiring scholarship for higher qualification and to qualify a higher post with high salary in the government institution (Itaia, 1979). According to Koae (1993) and agreed by Macdonald (2001) there are existing mediums of solving any grievance and dissatisfaction. These are put up in writing to the concerned department and or are taken up to court. Communities’ views and perspectives are considered as a means of improvement to policing strategies such as that adopted by the Kiribati Police Services. Elections of leaders are conducted on the basis of the public vote towards candidates (Brechtefeld, 1993). As Weber highlighted, class, status and power are achieved which is correspondingly true of my Kiribati society.  Peoples’ hard work irrespective of religious beliefs and traditional social cl ass and status, have equal and equitable access to opportunities which determine social and economic standings in my society. Bibliography Brechtefeld, N., 1993. The Electoral System. In: H. V. Trease, ed. Atoll Politics. Christchurch: Macmillan Brown Centre for Pacific Studies, pp. 43, 44, 45. Brym, R. J. Lie, J., 2007. Sociology Your Compass for a New World. third ed. California: Thomson Wadsworth. Itaia, M., 1979. Rebirth Te Mauri, Te Raoi, ao Te Tabomoa. In: KIRIBATI Aspects of History. Suva: Institutes of Pacific Studies, The University of the South Pacific, pp. 123,124. Koae, T., 1993. Corrupt and Illegal Electoral Practices. In: H. V. Trease, ed. Atoll Politics. Christchurch: Macmillan Brown Centre for Pacific Studies, pp. 105-110. Macdonald, B., 2001. Cinderellas of the Empire. Suva: Institute of Pacific Studies, The University of the South Pacific. Teitiniman, T., 1993. Serving the People. In: H. V. Trease, ed. Atoll Politics. Christchurch: Macmillan Brown Centre for Pacific Studies, pp. 343, 344, 345. Tui, R., 2014. Social Structures in Modern/Contemporary Societies. Suva: s.n. Weber, M., 2005. The Protestant Ethic and The Spirit of Capitalism. New York: Taylor Francis e-Library,. Worsley, P. et al., 1970. INTRODUCING SOCIOLOGY. 1 ed. Victoria: Penguin Education.

Antenna Systems For Radar Applications Information Technology Essay

Antenna Systems For Radar Applications Information Technology Essay The project will examine a variety of beam forming techniques which can be used in order to make radar electronic beam steering feasible. Commonly used mechanical rotating antennas for a 360 degrees views coverage are difficult to operate and expensive to implement. Thus, electronic beam forming is an attractive solution. This report is mostly interested in radar applications performing in 24 GHz frequencies, which can be used by car industries, in order to avoid obstacles on the road, for example, or security radars, covering 360 degrees views. Radar 2.1. Radar Definition Radar means radio detection and ranging, determining thus the original and still significant application of radar. The main reason for using radar is to estimate certain characteristics, such as the position, motion and presence of the specific surroundings in which the user is interested. Radar is actually a sensor which transmits electromagnetic energy into the surroundings and detects energy which is reflected by objects. If a directive antenna transmits electromagnetic energy through a narrow beam it is easy to predict the bearing of an object because of the energy reflected of it. The time needed for the transmission and reception of the energy represents the distance between the radar and the object. [21] Kinds of Radar There is a great variety of radars. Some radars provide navigation aid and safety on small boats and their size might be less than 15cm. Others are widely used by the police in order to measure the speed of the vehicles. Moreover, there are some radars so large as to cover many kilometers of land, long arrays of antennas and they all work together in order to supervise the flight of astronomical bodies or space vehicles. In addition, there are many radars at airport, with a more common size and rotating antennas. Finally, there are several radars, more complex, for mobile use. [21] Radars can be classified in many categories. As much as the waveforms are concerned, radars can be classified in 2 categories, they can be either Continuous Wave (CW) or Pulsed Radars (PR). CW radars use different antennas for transmission and receiving, and they emit electromagnetic energy continuously. Unmodulated CW radars precisely determine the target radial velocity and angular position, while information about the target range have to use some form of modulation in order to be gathered. In order to search and track target velocity, primarily unmodulated CW radars are used. Pulse Radars (PR) use a series of pulsed waveforms, mostly with modulation and can be separated based on the Pulse Repetition Frequency (PRF) in 3 categories, high, medium and low PRF radars. CW and PR radars are both able to determine target range and velocity by using different forms of modulation. [23] Continuous Wave Radar (CW) CW radar sets continuously transmit a high-frequency signal. Then, the received signal is permanently processed. In such a system, two problems have to be solved: avoid a direct connection between the transmitted and received energy (feedback connection), conduct the received echoes into a time system capable of doing run time measurements. A feedback connection can be prevented by: spatial separation   between the transmitting and receiving antenna frequency dependent separation  by the  Doppler-frequency  during the measurement of speeds. [4] Frequency Modulated Continuous Wave Radar (FMCW) CW radars are not capable of measuring distance, because the timing mark necessary lacks, preventing thus the system to time precisely the transmit and receive cycle and exchange the measured round-trip-time into range. This problem can be solved by using phase or frequency shifting techniques. As far as the frequency shifting method is concerned, a signal is used, which continuously changes in frequency around a specific reference, in order to identify stationary objects and measure the range. In order to achieve an up-and-down or a sawtooth-like alternation in frequency, Frequency-Modulated  Continuous  Wave radars (FMCW) are used, changing the frequency in a linear fashion. By constantly changing the frequency, there will be a difference between the frequency of the echo signal and the one transmitted. Thus, the difference  transmitters frequency shift will be relative to round trip time  and so the range  of the target too. The frequencies can be examined, when a reflec tion is received, and by comparing the received echo with the actual step of transmitted frequency, a range calculation like using pulses can be done. Consequently, the range of the stationary objective is given by comparing the transmitted and received frequencies. It is difficult to make a broadcaster able to send out random frequencies cleanly, and as an alternative, this frequency-modulated continuous-wave radar, use an easily changeable ramp of frequencies up and down. If the frequency modification is linearly over a broad area, by making a comparison among frequencies within this region, the distance can be easily determined. It is possible to measure only the complete value of the difference and thus, the results with increasing frequency modification signify a decreasing frequency change at a static scenario. [4] Characteristics e of FMCW radar: measuring the distance is potential by comparing the definite frequency of the received signal to a given reference (regularly direct the transmitted signal) the time required for transmitting a signal as longer than the duration of the measurement of the installed maximum range of the radar [4] By selecting the appropriate frequency deviation per time unit, the radar resolution can be different, and choosing the frequency shift duration, the maximum range can be varied. For instance, if the linear frequency of radar increases over 1  ms duration, the time-limited maximum range might be 150  km. If the maximum frequency deviation is 65 MHz, then stay about 433 Hz per meter for the filter for analysis. It is important that the amount of frequency modulation is considerably greater than the estimated Doppler shift otherwise, the outcome will be affected. The most common and easy way to modulate the wave is by linearly increasing the frequency. In this way, the transmitted frequency will change at a continuous rate. If a single antenna is used, a ferrite circulator has to separate the transmit and receive. However, using to different antennas, one for transmission and one for reception, is easier and cheaper to perform. On a ordinary substrate transmitting and receiving ant enna are placed exactly above each other as an antenna array. The direction of the linear  polarization  is rotated against each other by 180  degrees. An extra shielding plate reduced a direct cross talk (i.e. a direct coupling of both antennas) usually. From this direct coupling, arises a signal, which is suppressed due to the same frequency, since the measurement is performed to as a frequency difference between transmit and receive signal. [4] Radar Beamforming In order to create a beam with the appropriate and desired characteristics, radar beamforming, which combines signals from a set of sources, is essential. As much as an RF antenna system is concerned, each source may be a single array element or a subarray. A steerable beam is able to control the combination process electronically. Moreover, it can be replicated so as to create various independent beams, limited by hardware difficulty, complication and losses. [22] 3.1. Analog Beamforming A feed system is a network used in order to connect the antenna input to its radiators. The main reason for using such a system is to transmit power to the elements or collect signal from them. (transmit mode, or receive mode). While being on transmit or receiving mode, the required phase and amplitude excitations needed for the radiation performance must be maintained. The feed network is able to scan the beam, select among different antenna beam shapes and communicate with active sectors, by containing several switches and other devices, appropriate to execute such processes. Moreover, the feed network may contain amplifiers and other active devices. There are also many new developments, such as Switch matrix systems, Butler matrix feed systems and Vector transfer matrix systems, but the most significant are the RF lens feed systems. [1] 3.1.1. RF Lens One of the biggest problems when using a transmission line feed network is that amount of losses. Therefore, systems which are based on RF/optical principles are preferred. There is a large variety of RF Lens and many RF/optical feed systems also incorporate different types of beam scanning functions. RF refractive lenses are similar to their classical optical counterparts, which function by using the refraction amongst different materials. When using constrained lenses, the waves are forced to follow some specific paths, like in a geodesic lens. Another type of lens is the bootlace lens which in which the signals between the input surface and the output surface are routed on transmission lines. Occasionally, a conformal array feed uses different combinations of lens types, or lenses and matrices. Small array antenna elements are used by an RF lens as input/output probes that couple to the lens region. These probes exist in an array environment which is characterized by reflections a nd mutual coupling and the associated design problems. In particular in circular lens designs, there can also be standing waves caused by reflections from the opposite side of the lens. Another problem is the variation of the element phase center with frequency. [1] Rotman Lens A Rotman lens is a parallel-plate structure used as the beam forming network (BFN) for a linear array of radiating antenna elements. It is easy to form a beam forming network suitable for use with a planar array, by stacking numerous lenses. Rotman lenses are preferred because of the advantages that they offer, such as ease of manufacture, light weight, low cost, monolithic construction and availability of many beams at the same time. Rotman lens is capable of extremely wide-band operation, because it is a true time-delay device which produces frequency-independent beam steering. Because of these characteristic, Rotman lens is a possible candidate for use in multi-beam satellite-based applications. [2] The electrical area that a Rotman lens occupies is very large (usually hundreds of square wavelengths) and because of this, an entirely precise analysis is not possible. The planar circuit approximation applies to structures which are electrically thin in one dimension, like parallel-plate lenses. The effort required for their analysis is reduced to that of solving a (line) integral equation for the relationship between the RF voltage and current at the periphery of the structure. [2] The R-2R Lens The R-2R lens feed (Figure 1) has feed ports on the perimeter of a parallel-plate lens with radius R, in order to illuminate the output ports on the opposite side of the lens. These output ports are linked to the element ports on the 2R radius circular array with cables of equal length. The number of feeding ports is half the number of element ports. This type of arrangement allows all feed points to be ideally focused, resulting in a plane-phase front. In order to scan the antenna beam at angle ÃŽÂ ¦, the feed point has to be moved an angle 2ÃŽÂ ¦. One illumination taper can be achieved, by combining three to four adjacent feed ports, resulting in lowered sidelobes. [1] Figure1: The R-2R lens feed system [1] It is essential to add several switches on the lens ports, in order to scan the beam. One has to be allowed to use numerous beam ports at the same time in order to achieve a multiple beam generation. This problem could be solved by using half the lens for beam ports and connect the other half to a 90 ° arc array. R-2R lens are considered to be a special case of the Rotman lens, which is typically used for linear array feeds. Furthermore, for circular arcs up to 90 °, the Rotman lens can be used. Actually, the curvature does not have to be circular, as the design in general, curvature of lens input and output lines, cable lengths, and so on can be optimized together with the array shape. It is possible to achieve ideal focusing in the Rotman lens only for three beam directions. [1] The R-kR Lens The R-kR lens feed system has as much ports on the lens as there are radiators on the circular array. In order to cover 360 ° views, the lens ports have to be used more than once, both as feeding points and for connecting to the radiating elements. In order to achieve this, switches are used, circulators (Figure 2), or two lenses at the same time. The radiators placed on radius R are connected by cables of the same length to the ports of the circular lens with radius kR. When k is about 1.9, a planar phase front for rays within a sector of about 120 ° is obtained. This shows that the lens is nearly two times the size of the circular array, thus, it cant fit inside the circular array if it is not filled with a dielectric with permittivity more than 4. If broadband radiators are used, the R-kR lens-fed circular array can be very broadband. The bandwidth could be limited by using switches or circulators. The phase center of the radiators is a design parameter of critical importance and must be located on the design radius R. [1] Figure 2: The R-kR lens, here with circulators. [1] In order to limit the focusing performance, several types of element have a phase center which is able to change position with frequency. [1] Mode-Controlled Lenses A radial transmission line which forms a circular parallel-plate lens is possible to act like a circular array feed. If it is excited by several probes placed close to the center, the modes generated will direct the energy toward a part of the lens periphery. Therefore, by controlling the modes using phase shifters or a hybrid network connected to the input probes commutates the excitation. Then it is easy to connect these pick-up probes to the radiating elements, via additional phase shifters if needed. [1] Luneburg lenses In order to achieve wide angle scanning, the Luneburg lens, is the appropriate and desired device. As far as land mobile operations are concerned, an antenna able to scan in a two-dimensional (2D) plane is required, particularly if the scan angle is large. The Luneburg Lenses are used in order to provide single or multiple mechanically scanned beams, at microwave frequencies. Nevertheless, because of the advent of phased arrays the lenses are now usually used for radar applications as a wide angle passive reflector. This is why nowadays there are appropriate lens configurations which can be established by permitting the inclusion of controllable dielectric material into a Luneburg Lens so as to make the lens suitable for electronic scanning at 24 Ghz. [1] Digital Beamforming When performing beamforming in the digital area, it is called digital beamforming. The realization can demand huge volumes of digital information to be processed at extremely high rates, but current improvements in processing hardware have made Digital Beamforming a useful alternative to RF combining in many ways. Moreover, it has allowed the formation of systems which were not practical with legacy technologies. Below are presented the benefits of Digital Beamforming. [22] Simplicity of hardware If the RF and analog hardware becomes a minimal device, collecting data, it would be an ideal case. Then, all the difficult and complicated process of the signal is done in firmware, which is a more flexible and gainful way of processing comparing to RF plumbing. In addition, it is possible that the overall size of the system, as long as its weight, will be reduced a lot, and this is particularly significant in airborne systems. [22 Replication Digital beamforming is the best option when many independent beams are needed. By using digital beamforming, it is easy to form each beam completely digitally, without any analog or RF hardware further required. The quantity of beams like these is then partially limited by power, speed and synchronization of the processing elements, which become even more cost-effective and flexible each year. [22] Scanning and Tracking It is not possible to steer electronically each beam (e.g., to track a moving source). However, by using the precisely same stream of digital samples from each antenna element, it is potential to turn each independent beam to a different source. Thus, it is easy to reduce extremely difficult receiver scenarios to firmware buildings blocks which are now usual. [22] Flexibility These digital systems can be adapted without any difficulty to varying requirements, such as multipath combination, application bandwidth, tracking requirements or interference rejection. A SMOP (Simple Matter of Programming) is able to perform numerous adaptations. [22] Radar An array antenna which is a low Cost Transmit/Receive one provides agile beams to track multiple targets at the same time. [22] Anything that can be done by using an analog beam forming can easily be done digitally too. Choosing to do everything digitally might lead to several difficulties because of the extreme requirements on data transmission, storage, and signal processing. However, nowadays such problems are easily solved because of the rapid growth of computer power, either software or hardware. When using an analog reception beam forming, the element signals are combined with weights determined by feed networks and/or phase and amplitude controlled receiver modules. In digital computer, it is possible to do the same operations on the element signals just by converting analog signals to digital ones. Thus, the formation of many receive beams can take place at the same time, without feed losses, which are common when using analog systems. Moreover, the element modules in the digital systems have low noise amplifiers (LNA) preceding the analog-to-digital conversion. A lossless beam forming is created as t he LNAs set the signal-to noise ratio, so that it is not affected by transmission losses. The advantages of a digital beam forming in this case are not so obvious. After the transmission of the beam, it is not possible to change the beam shape or to perform any other signal processing. Nevertheless, digital synthesis of the transmitted waveform on the element level combined with DBF on reception can offer remarkable system capabilities in terms of, for example, LPI (low probability of intercept) radar with jamming resistance. A wide transmission beam illuminating the area of interest and multiple, narrow, digitally formed receive beams has also been suggested for LPI systems-ubiquitous radar and OLPI radar (Omnidirectional LPI). There are many aspects which can best be performed digitally, such as the need for amplitude and phase control, polarization control, switching of the active sector, compensating for element patterns in the beam steering algorithms and calibration. A DBF ant enna system has a combination of numerous subsystems and components. Receiver channel imbalance, , A/D converter offset errors, amplitude and phase errors and frequency dependent errors are some of the possible imperfections in these subsystems and component which can influence the performance of the overall system. The type and requirements of each processing used influence the importance of such imperfections. Usually, array calibration and special error correction schemes are included in the antenna system design. [1] 3.3. Beamforming Transmitter Architectures Several beamforming transmitter architectures exist, suitable for integrated circuit implementation as well as many well-known topologies for separate implementations of phased array transmitters. The goal is topologies appropriate for performance in consumer products at 24 GHz. Electrical beamforming is achievable if the phase of the signal to each antenna element in the array is separately set. Moreover, a larger number of patterns can be achieved and the sidelobe level can be reduced compared to uniform power distribution if the power to each antenna element is set individually. [3] 3.3.1. Baseband Phase Shifting In the baseband phase shifting architecture the phases and amplitudes of the signals are created in the digital baseband. The phase control is very accurate, but the architecture demands an entire signal path between the baseband and the antenna for each element (Figure 3). Also, the architecture can be called digital array, because the beamforming is being performed in the digital domain. Such an architecture lead in a large hardware cost and power spending because there are many signal paths, but also in big flexibility. As a result, this architecture is perhaps very complex for radar at 24 GHz. In order to transmit individual information in various directions, in MIMO systems (multiple input multiple output), the flexibility of the architecture with parallel paths is available too. [3] Figure 3: Transmitter architecture for baseband phase shifting [3] 3.3.2 Local Oscillator Phase Shifting Phase shifting can occur in the LO path as well (Figure 4) Moreover, it is likely to use phase shifters in the signal path, at IF or RF. Whether performing the phase shift at LO or RF or place them at different places, the same amount of hardware is achievable. If they are placed in the LO path, amplitude variation among dissimilar phase settings is less significant if the mixers are driven hard. In this way, amplitude variation in the LO path will not influence the signal path a lot. Thus, it is easier to implement the phase shift in the LO path. [3] Figure 4: Transmitter architecture for phase shifting in the local oscillator path, polar modulation [3] 3.3.3. Offset Local Oscillator Phase Shifting If the power amplifier and local oscillator are used at the same frequency, injection pulling is possible to occur. It might not be easy to accomplish a sufficient isolation so as to avoid the corruption of the oscillator signal by the PA. To moderate this on an architectural level, offset LO phase shifting may be used as shown in Figure 5. Beamforming transmitters have applications like radar (24 GHz and 77 GHz) and WLAN (60 GHz) which are placed at high frequencies. It is valuable to use the lowest frequencies possible on the chip, and multiply the frequency close to the PA. A reduced VCO frequency makes allows a wider tuning range, and the increasing MOS varactor quality factor. [3] Figure 5: Offset local oscillator phase shifting for beamforming transmitter [3] 3.3.4. Ring Oscillator Based Phase Shifting A ring oscillator which has a tunable phase shift among the oscillating elements is used in such architecture (Figure 6). The tuned oscillators in the ring are separately detuned from their center frequency. The LC-loads is capable of sustaining up to +-90 degrees phase shift. It is important that the phase shift around the ring is constantly equal to 360 degrees, or a multiple thereof. The phase shift among consecutive elements is zero degrees if each oscillating element is non-inverting, and no excess phase shift is introduced in the loop. By putting an excess phase shift of KÃŽÂ ´ degrees it will have as a result a phase shift of ÃŽÂ ´ degrees in each of the equal K oscillators in the loop. [3] Figure 6: Transmitter architecture for variable phase ring oscillator in a phase locked loop [3] 3.3.5. Radio Frequency Phase Shifting The phase shifting which is the most hardware efficient, including numeral building blocks, is to carry it out just before the power amplifier. The power amplifiers are the only circuit components that have to be duplicated (Figure 7). The disadvantage is that the phase shifting is being performed at the highest frequency and signal level in the system. When an envelope modulation scheme is used, the linearity of the phase shifters may be a problem while noise is not as significant when the power level is high. It might be useful to implement the phase shifters at the highest frequency. If transmission lines are used as separate phase shifters, they become shorter with frequency. This is an ordinary architecture in radar systems. Several fixed phase shifts are in that case implemented and switches controlled by selection logic determine the phase shift. Certainly, the transmission lines are linear and thus, these phase shifters can easily be used in envelope modulated systems. Moreover, the delay is stable over a wide bandwidth. A set of fixed phase shifts is then implemented and switches controlled by a selection logic choses the phase shift. Of course the transmission lines are linear so these phase shifters can very well be used in envelope modulated systems. Another advantage is that the delay is constant over a wide bandwidth. [3] Figure 7: Transmitter architecture for phase shifting in the radio frequency path. [3] Applications for 24GHz Radar Sensors Modular 24 GHz Radar Sensor for Digital Beamforming on Transmit and Receive In order to increase the angular resolution, numerous switched transmitters are preferred, as they need less hardware effort. The FMCW radar sensor is the best solution, providing up to eight transmitters, switchable ones, and eight receiving channels which provide parallel receiving, and they all allow digital beadforming. An innovative switching technique via switchable amplifiers is preferred. [5] Four Channel 24-GHz FMCW Radar Sensor with Two-Dimensional Target Localization Capabilities Results on the angular measurements are improved when using an FMCW radar sensor, compared to standard beamforming methods, as far as the target localization is concerned. Furthermore, the determination of other characteristics required will be allowed, such as the range or velocity. [6] . 24-GHz Automotive Radar Transmitter with Digital Beam Steering in 130-nm CMOS (Complementary metal-oxide-semiconductor) Many Pas are connected to different antenna elements so as to control the steering of the beam. The output phases of the PAs are controlled separately through 360 degrees by binary weighting of quadrature phases. The circuit has 18 PAs,and each one of them delivers 0 dBm to the antenna, ensuring an output power of 13 dBm. The antenna array, which is constituted of 18 elements, will be 11 cm at 24 GHz and will have 12 dB directivity and a half power beam width of 5 degrees. [7] Design and Performance of a 24-GHz Switch-Antenna Array FMCW Radar System One transmitter, one transmitting antenna, four receiving antennas, one receiving channel and an SP4T switch (single-pole four-throw) are the elements which compose a 24-GHz FMCW radar system. In order to increase the inter-connection loss and create a compact whole size, radio-frequency (RF) and intermediate-frequency (IF) circuits are integrated in the antennas. The receiving antennas are sporadically switched to the receiving channel. Beamforming methods are used in order to evaluate the performance of such a developed system, by estimating the angle, velocity and range. [8] Imaging Radar Sensor Front-End with a Large Transmit Array Automotive applications need medium range imaging radars, such as the 24 GHz imaging radar front-end. In this radar, a large switched transmit antenna array is combined with a coherent FM-CW architecture. It permits two dimensional electronic scanning in range and cross range with excellent crass range resolution over a wide angle of new using very low EIRP. The advantage of using such radar is that it requires just a small number of active millimeter wave components. [9] Novel Photonic Rotman-Lens Design for Radar Phased Array Antennas A new microwave photonic implementation of a Rotman-lens is proposed in this project, providing superior performance and functionality. The scanning unit presented is an optical element, where photo-detectors attached to the transmitting/receiving antennas are the interfaces, doing conversions among the RF signals and their particular optical waves. Actually, the optical module is a photonic Rotman lens, designed like its RF complement. Despite the advance of practicing the solution in a photonic module, the recommended photonic Rotman lens superior design is able to realise a linear phase profile with a varied slope at the output of the lens for any potential spot at the input to the lens. This is contrary to what is presently accessible with the usual RF Rotman lens, where output phase front linearity is achieved for a small quantity of input spots. A better performance is achieved by increasing the curves of the photonic input and output surfaces of the lens, having an off-centere d elliptical profile, and not the typically used spherical curvatures. [10] Virtual Antenna Beamforming (VAB) for Radar Systems by Using Orthogonal Coding Waveforms An original way of creating virtual transmitting and receiving radar antenna beams at the same time is to use orthogonal coding waveforms from the antenna elements and deal out digitally their echoes at the receiver. Many virtual transmitting-receiving radar antenna beams can be produced at the same time by using the same quantity of beamforming filters with no any increase on the transmitted power or antenna gain or resolution loss. Both virtually formed antenna beams and common phased arrays of equal size are able to achieve the same antenna gains and spatial resolutions. Since the antenna radiation pattern can be completed almost isotropic, the original system has low probability of intercept (LPI) property. While the transmitting and receiving beams are both virtually implemented through digital filtering, expensive radiation phase shift used in phased arrays is unnecessary for beam scanning in this actual system. [11] Compact Two-Layer Rotman Lens-Fed Microstrip Antenna Array at 24 GHz A new way of realizing a compact Rotman lens-fed antenna array is presented in this paper. The lens-fed antenna has the construction of two layers, which is an original option of reducing the Rotman lens size. This is performed at 24 GHz approaching automotive sensing radar. The lens has a metal layer on the top, a dielectric, a regular ground, a dielectric, and a metal layer on the bottom, in sequential order. The antennas are put on the top layer, while the layout of the lens body is positioned on the bottom layer. They are both connected electrically via slot transitions. This structure, composed of two layers, offers many advantages, because it reduces the entire size of the lens, as well as the total loss of the delay lines, as the lines can be as short and straight as possible. This two-layer Rotman lens-fed antenna array is evaluated in terms of scattering parameters and beam patterns. [12] Cylindrical arrays with electronic beam scanning In order to provide a continuously 360 degrees scan by the directional pattern of a cylindrical array using electronic means, there are several methods proposed. It is important that the circular aperture distribution related to the far-field directional pattern is subjected to rotation comparative to the fixed array. With the intention of synthesizing appropriate forms of directional pattern, there are various techniques describing the independent control of the amplitude and phase of the aperture distributio

Causes Of The Punic Wars History Essay

Causes Of The Punic Wars History Essay The Punic Wars were a sequence of three battles that were fought in the period 264 to 146 BC between Rome and Carthage. They were the largest battles of the time. The main reason for the occurrence of the battles was the conflict in the vested interests of the Carthagian Empire and the rapidly expanding Roman Empire. The Romans saw the need to expand their vast empire through Sicily, which was then an important hub, and was partly under Carthagian control. Carthage, being the dominant power in the West of the Mediterranean and strong in its naval power, resisted all advances by the Roman Empire, which was an extensive maritime empire. This resulted in the first of three major wars that were characterized by a number of battles. At the end of wars fought for over a century, Rome emerged victorious in the Roman-Syrian War with the defeat of Seleucid King Antiochus III the Great and went on to be one of the most powerful empires of the time till the fifth century A.D Carthage was a powerful thalassocratic city in modern day Tunisia. It had the largest navy and fought its wars through mercenaries, especially Numidian, rather than a permanent, standing army as was the case with the Roman Empire. In 264 BC, the Roman Empire conquered the Italian peninsula to the south of River Po bringing the conflict between the two rivals to a boiling point. This triggered the First Punic War that lasted between 264-241 BC. The First Punic War was mainly a naval war which was also partly fought on land in Sicily between Hiero II of Syracuse and Mamertines of Messina. The Mamertines first enlisted the help of the Carthagians but went on to betray them and sign a treaty with the Roman Senate. This led to the Carthagians to directly support Hiero bringing them at loggerheads with the Roman Empire for the control of Sicily. In 261 BC, after a defeat at the Battle of Agrigentum, the Carthagians resolved to fight their battles at sea rather than on land. They consequently successfully fought the Romans at the Battle of the Lipari Islands in 260 BC. Rome decided to expand its existing fleets to over 100 warships in two months so as to counter the all-powerful Carthagians in the sea. They were specifically designed to incorporate a Corvus so as to facilitate sinking and ramming of Carthagian ships. This guaranteed a stream of successes for the Roman infantries except for the Battle of Tunis. In 241 BC, the Cart hagians signed a peace treaty with the Romans in which they were forced to evacuate Sicily In addition to paying an enormous war indemnity. Further, in 238 BC, the Carthagians lost the islands of Sardinia and Corsica to Rome during the Mercenary War. This ensured that Rome was the superpower and could comfortably control any sea-borne or land invasion of Italy, all sea trade routes in the Mediterranean and further invade foreign shores so as to expand the Empire. Rome further fought and conquered colonies through the Illyrian Wars. Carthage was however forced to retreat and build its finances and expand its empire in Hispania. In the ensuing period between 238 BC and 219 BC, several trade agreements and mutual alliances between Carthage and Rome took place. These treaties were mainly about the release of all 8,000 Roman prisoners without ransom and the handing over of all deserters serving in the Carthage army. This latter section of the agreement was not adhered to leading to a reject of the treaty by the Roman senate and an increase in the indemnity fines. This therefore resulted in a liquidity problem in Carthage leading to the Mercenary war in which the mercenaries that had previously fought for Carthage to revolt due to loss of power over the sea-ways. With a comfortable win, Carthage and Rome enjoyed relative peace till 219 BC when Hannibal, having silver riches conquered by his predecessor Hamilcar Barca and a large native army from the subdued native tribes such as the Celts of the Po River, attacked Saguntum which was by then under special protection by Rome under conquest termed as the Iberian Co nquest. The Second Punic War occurred between 218-201 BC. Hannibal, leading the Barcid Empire, and allied to the Carthagians, crossed the Alps and invaded Italy in a series of highly successful battles. Hannibal, however, never attained the goal of creating a major division between Rome and its allies. These wars were fought on three frontiers. First, in Italy, Hannibal fought the Romans; secondly, in Hispania, Hasdrubal, a brother to Hannibal, constantly defended the colonies conquered and finally in Sicily, Rome fought for control which was further troubled by the continuing First Macedonian War. After a successful attack on Saguntum, Hannibal went further on to surprise the Romans by attacking Italy. Although he managed to win that particular battle, and also the Battle of Trebia, The Battle of Trasimene and the Battle of Cannae; he lost his only siege engines and most of the elephants and men to the icy mountains thereby strategically losing the battle in Rome which would have ensured a win of the entire war. His war strategy, which was to turn the allies of Rome against it since he could not take Rome on due to insufficient men, failed. Except for a few southern states, the rest remained loyal. Rome further drafted army after army after the defeats which ensured Hannibal was cut off from aid. Hannibal also never received any substantial reinforcements from Carthage which prevented him from decisively conquering Rome and ending the war at a win. The war raged for fifteen years during which the Roman Empire was unable to conclusively end the battle since Hannibal was a master general coupled with the fact that they were already engaged in the Macedonian Wars. Hannibal, realizing he was eventually running out of supplies, decided to retreat to his home base in Africa in aid to an attack waged by Rome but was thoroughly defeated in The Battle of Zama. In Hispania, Hasdrubal was soundly defeated by a young Roman commander, Publius Cornelius Scorpio. He therefore decide d to abandon Hispania so as to reinforce his brother Hannibal. This alliance was later trampled upon ending the Second Punic War in 201 BC. The Third Punic War, which lasted between 149-146 BC, was invoked by the extended Siege by Rome on Carthage and its consequent complete destruction. There was growing resurgence by Hispania and Greece against Rome coupled with the tangible increase in Carthagian wealth and martial power. The Roman Treaty incorporated a clause in which Carthage was to have no military thereby suffering attacks from the neighboring Numidia, a favorite of the Roman Empire. All arbitrations were done by the Roman Senate which was heavily in favor of Numidia. After 50 years since the end of the Second Punic War, The Carthagians decided they were no longer bound by the treaty and mustered an army to combat the Numidian attacks. This Punic Militarism was heavily objected to by Rome especially by Cato the Elder who declared that Carthage must be destroyed. In 149 BC, Rome issued demands that could not be met such as the proposal to demolish Carthage and build it further from the coast into the interiors of A frica. This drew Carthage into an open fight with the Romans. Over a short period, Carthagians innovatively made a myriad of weapons and were able to resist initial Roman attacks on their city. However, a three year siege on the city ended the war in which the walls of the city were breached by the Romans under the command of Scipio Aemilianus, who burnt the city to the ground and aggrandized other Carthagian settlements. The Carthagians who were not killed were sold into slavery. This brought the Carthagian Empire to an end.

The Usefulness of Financial Statements Essay -- GCSE Business Marketin

The Usefulness of Financial Statements The primary means of communicating the financial effects of organizational activities and transactions of a company to outsiders is the financial reporting system. This reporting system includes communicating financial information through annual financial statements, as well as through reports filed with the Securities and Exchange Commission, voluntary forecasts, and other financial and nonfinancial releases. Financial statements are the main source of financial information conveyed to parties external to the company. The full set of primary financial statements consists of a balance sheet, income statement, and statement of cash flows. External financial statements have a general purpose and are designed to meet the needs of investors, creditors, and other users of the external reports. They are historical in that they communicate activities and events that have already occurred. Financial statements are prepared on an accrual basis; they measure the impact of events and transactions when they occur and not simply when the cash consequences of such events and transactions are realized. Financial statements are useful in evaluating an enterprise's profitability, liquidity, and long-term solvency and equity structure. An analysis is conducted from the perspective of external users of financial statements and it relies on the annual report of a corporation and other publicly available information. Management, of course, also has access to extensive internal financial data, and their concerns extend to subdivisions of the enterprise, such as the performance of subsidiaries, divisions, departments, and operating functions. External reports are intended primarily for stockholders, creditors, directors, and regulators such as the SEC. Although externally reported information is also useful to corporate management at the highest level, it is far too aggregate to be useful for decision making by lower levels of management. And even top levels of management need financial information for decision making with respect to the performance of the various components or segments of the enterprise. It is vital that managers understand how their corporation organizes itself and at what levels the various functions such as manufacturing, marketing, finance, and research and development are performed. Managers ... ...d profits. It is seldom possible to form a judgment about the performance of an individual segment or division by inspecting the records of only that segment or division. All financial information must be analyzed together to serve useful in and out of a corporate entity. Works Cited: Financial Accounting Standards Board, 1978, Statement of Financial Accounting Concepts No.1: Objectives of Financial Reporting by Business Enterprises (Stamford, CT., Financial Accounting Standards Board). Financial Accounting Standards Boards, 1984. Statement of Financial Accounting Concepts No.: Recognition and Measurement in Financial Statements of Business Enterprises (Stamford, CT.: Financial Accounting Standards). American Accounting Association, 1957. Accounting and Reporting Standards for Corporation Financial Statements and Preceding Statements and Supplements (Iowa City, Iowa: American Accounting Association). Parker, R.H., 1979. Evolution of Corporation Financial Reporting (Nigeria, Africa: Thomas Nelson and Sons Limited). Gray, S.J., 1984. Information Disclosure and the Multinational Corporation (New York, New York: John Wiley and Sons).

Faulkners Human Spirit Essay -- Authors

William Faulkner accepted his Nobel Peace Prize in December 1950. During his acceptance speech, Faulkner proclaimed that the award was made not to him as a man, but to his life’s work, which was created, â€Å"out of the materials of the human spirit something which did not exist before.† (PF ) He felt that the modern writer had lost connection to his spirit and that he must reconnect with the universal truths of the heart—â€Å"love and honor and pity and pride and compassion and sacrifice.† (PF ) Through his characters voice and exposure of their spirit, Faulkner solidified man’s immortality by â€Å"lifting his heart, by reminding him of the courage and honor and hope and pride and compassion and pity and sacrifice which have been the glory of his past.†(PF ) Although some critics have characterized his work as violet, dealing with immoral themes and the miseries and brutality of life; it can be argued that even his most sad and dep raved characters express positive virtues and personal strengths, even if by a negative example. The purpose of this paper is to discuss the portrayal and manifestation of the human spirit in a select few of William Faulkner’s literary characters, showing that they possess both human strength and flaws. So what is the human spirit and why is it significant? It is a somewhat indefinable concept. According to Faulkner the human spirit is the connection to the universal truths of the heart—â€Å"love and honor and pity and pride and compassion and sacrifice.† (PF) But more than that, he was concerned with the idea that man had become oblivious to the problems of the spirit; that he lost his awareness of the inner struggle of heart in conflict with itself. The human spirit can also be described in terms of survi... ...., 1996. 209- 234. Utley, Francis L., Lynn Z. Bloom, and Arthur F. Kinney, eds. Bear, Man, and God: Eight Approaches to William Faulkner’s â€Å"The Bear.† New York: Random House, 1971. Volpe, Edmond L. A Reader’s Guide to William Faulkner. New York: Noonday Press, 1965. Waggoner, Hyatt H. William Faulkner: From Jefferson to the World. Lexington: Univ. Kentucky Press, 1959. Wagner, Linda W., ed. William Faulkner: Four Decades of Criticism. East Lansing, MI : Michigan State Univ. Press, 1973. 139 Warren, Robert Penn, ed. Faulkner : A Collection of Critical Essays. Englewood Cliffs, N.J.: Prentice-Hall, Inc., 1966. . â€Å"William Faulkner.† William Faulkner: Four Decades of Criticism. Linda W. Wagner, ed. East Lansing, MI: MSU Press, 1973. 94-109. Webb, James W. and A. Wigfal Green, eds. William Faulkner of Oxford. Baton Rouge: Louisiana State Univ. Press, 1965.

Abolishing Slavery: Abraham Lincoln

Abolishing Slavery: Abraham Lincoln, the Emancipation Proclamation, and the end of slavery all go hand in hand in modern day United States classrooms. Lincoln, a Kentucky native, was the great 16th president of the United States who brought freedom to black slaves throughout the country, forever abolishing slavery in the nation. Well, that’s at least what has been instilled in the young minds of children across the US. Before we can start calling Lincoln the â€Å"Great Emancipator,† or an abolitionist we need to take a look at the facts.Lincoln’s reign as a political leader was in an extremely crucial time of need in our country as the country was tearing apart with the eventual Civil War looming. In 1858 Lincoln ran for, and lost, the senator position in Illinois. His running mate Stephen Douglass made a veteran political move by accusing Lincoln of supporting black equality, which helped put fear into many voters’ ballots when they decided to vote for t he less radical Douglass.Lincoln, being the knowledgeable politician he was, responded with a statement in an attempt to clear his name with the white population by saying â€Å"I am not, nor ever have been in favor of bringing about in any way the social and political equality of the white and black races. † Although these views were most likely used as a political ploy, they didn’t sit well with the black community when Lincoln started receiving credit for freeing the slaves. Fast-forward about a decade when Lincoln was in the presidential seat and Lincoln was facing similar issues in his struggle to unify the wilting United States.As president Lincoln’s main goal was to unify the two sides of the United States: the Union and the Confederacy. In order to unify the country Lincoln had to hurdle his biggest obstacle in abolishing slavery. Perhaps the only reason Lincoln supported the freeing of slaves was because he realized it was the only way to unify the coun try, which is a solid argument in itself to the idea of Lincoln receiving too much credit for freeing the slaves. Anyhow, Lincoln somewhat reluctantly proceeded to announce his plans to abolish slavery with his first plan called compensated emancipation.In this plan Lincoln would free the slaves by paying off the slave owners large sums of money in return for the slaves freedom. Once freed, the slaves must move out of the country to foreign lands such as the Caribbean, Latin America, or West Africa. Although this plan would work for Lincoln in his main goal of unifying the country, the black community was outraged, rightfully so, in that the United States was just as much the blacks land as it was the whites land. After some time, Lincoln finally came to the realization that in order to avoid a country separation he had to release the Emancipation Proclamation (EP).The EP was a two-part document, the first being known as the preliminary EP, which was released on Sep 22, 1862. This g ave the confederate states 100 days to join the union or Lincoln would abolish slavery in the states that continued to rebel. On Jan 1st, 1863 the proclamation went into affect and Lincoln abolished slavery in the nine of the ten states that had yet to join the Union (Texas was exempted). This is the day in history that is perceived to be the day that slavery was forever abolished.However, slavery was only abolished in nine rebellious states while it was legal in states that had been apart of the Union before that Jan 1st date. Although this was clearly not the end of all ends in slavery, it was a genius political move by Lincoln who achieved his goal of unifying the country. But that’s all it was. Lincoln did his job; he unified the country. But, to pronounce Lincoln as the man who ended all slavery is simply put, ridiculous. It was defiantly a start as over 50,000 slaves were freed on that historic day, but was far from over as pockets of the country were continuing on with slavery as if nothing had happened.This included the entire state of Texas who was somehow exempt from the whole ordeal. Lincoln indeed was a great president who brought the country out of deep times, but he was not the man who ended slavery on the spot as we have been inclined to learn over the years. It was the next two or so years leading up to the 13th amendment that deserve most of the credit. The time following the EP was joyous for some, insulting to others, but in truth was most important to the complete freedom of blacks in America. Slavery continued on in the states for quite some time after the EP, which started to confuse many black leaders of the time.One of the most important dates in freeing the blacks was June 19th, 1865, two and a half years after the EP, when General Gordon Granger landed in Galveston, Texas to announce that slavery had been abolished and that at that moment all slaves had equal rights to their slave masters and could do as they please. This creat ed much jubilation in the state and around the country, as these slaves had been â€Å"illegal† slaves for over two years. This date, now celebrated as Juneteenth as an official holiday in 38 states, is considered to be the beginning of the end of slavery in the United States.About 6 months later on Dec 6th, 1865 the 13th amendment was added to the constitution stating that slavery was officially prohibited in the United States of America under any circumstances. It took nearly three years since the EP to completely abolish slavery, which by some people is considered completely ridiculous and insane, but it must be noted that the EP was not put in place to abolish slavery, but was in fact an intricate and in many ways brilliant political move by Abe Lincoln to unify the country.It was not intended to free the slaves as most of us are falsely led to believe. So, when are we going to get the celebration of abolished slavery in America right? No more should Lincoln receive credi t for abolishing slavery, we need a real holiday to celebrate this historic event. How about December 6th? The day when over 4 million slaves were finally free and slavery was officially abolished in the states. So here’s to a December 6th holiday, the day the 13th amendment of the constitution was established.

Persian Gulf War

The war was fought very fiercely for Just one year between 1990 and 1991. Its effects can soul be felt In today's society. The war had quite a large impact on history, particularly modern history. The outcome of the war arguably poisoned the minds of many people, crippling relationships between many groups; particularly between the West and the Middle East. Its whole entirety has left a major impact on the lives of many people and will continue to be looked at as a dark time for Middle Easterners and quite the opposite for Westerners.It is often argued that the war was ultimately a fight for oil. Several sources do present their arguments in favor of this statement, and are successful in establishing a case where this statement is true. His real motive was probably to take control of the wealth possessed by Kuwait (Lowe 2005, up. 253). Referring to Sad Hussein, the author has stated that Sad Hussein's primary motive for the war was to take control of Kuwaiti wealth. Their wealth was their OLL Industry; an Industry that the world relied on heavily, particularly for countries In the Middle East and beyond.Most people take the view that Hussein was short on finances following the Iran-Iraq neighboring countries; this had mostly gone to waste and Hussein would not pay it all back. Additionally, he believed that Kuwait was historically a part of Iraq. Had this been true, he would have already possessed Kuwait for a long time. Several reasons can be produced to support the claim. As Iraq was short on finances, they needed only to claim a nation that had a booming industry. They didn't need to take over a country that had larger powers, and both the superpowers at the time were neutral awards Iraq.These facts, along with the small size of Kuwait, were in due course the main characteristics for Hussein's motives. Moreover, it was the West who was also in strife when they realized what was at stake from the invasion of Kuwait. Lowe (2005, p. 253) argues that Iraq and th e USA were previously on neutral terms, as USA had helped Iraq in their war with Iran. In contrast to this, USA was threatened by the invasion, as it left Saudi Arabia incredibly vulnerable. Saudi Arabia at the time (and still to this day) have possessed the largest oil industry and production for a long mime.This fact left several Western nations vulnerable as well, as Iraq were very close to invading Saudi Arabia next and this threat was made very clear to the West. If Saudi Arabia were to be invaded, their oil industry would have been controlled by Iraq, and the supply to the West would have been cut. The overwhelming evidence suggests that the war was a fight for oil, and a fight to protect the wealth produced by the oil industry. A variety of viewpoints emerge from political conflict in Iraq, and other Middle Eastern nations.Most people take the view that the poor decisions by politics within Iraq, particularly on the part of Hussein, led to the downfall of the overall position and reputation of the Middle East post-war. ‘International politics of Middle East have long been volatile and unstable' (Cellophanes 1992, up. 10). Indeed, the politics within the Middle East have been volatile and unstable, and this has led to their national identity becoming weaker. There is evidence to support that there was conflict in national interests, religions and ethnic rivalries post World War Two.These inflicts have led the people to take sides within their own country, and to oppose neighboring countries who they should call their ‘brothers' or ‘sisters'. The balances of interests have been made harder and harder to achieve and maintain, stemming from the poor decisions made by the leaders of each nation. Therefore, Iraq's downfall arose from Hussein's overconfidence and greed for power, ambition, wealth and reputation. There are many reasons in favor for both sides of the issue about economic impacts for Iraq, as well as the U. S.The majority viewpo int is that Iraq was already suffering financially, and the war left them in an even worse position. The financial crisis in Iraq had reached breaking point by early 1990 and Sad Hussein was in a desperate position (Finland 2003, up. 14). It is established that his motive for the war was to gain money, but the war was decisively won by the opposing side, proceeding to the economic suffering of Iraq. Conversely, the U. S. Did not suffer nearly as much. Hancock (2006) argues ‘The Gulf War being the least expensive of all American wars resulted in a cost of only $26. 92 per American citizen'.Comparatively, citizens of U. S. Had suffered a low economic loss and this was loosely opposite to that of Iraqis and other Arab nations. It is unarguable that the Middle East suffered a lot more economically compared to U. S. A. According to many sources, the aftermath of the war has left its mark on many around the world, particularly Iraqis. Common far more in number, but left negativity w ith Iraq. The Columbia Electronic Encyclopedia (2012) argues that Kuwait and Iraq suffered enormous property damage. This fact presents an argument to support that the huge property damage offered to Iraq applied to quite the rest of the Middle East.They had suffered huge casualties and property damage from the war, but this only created more anger for Iraq. Continued uneasiness and conflict between Iraq and coalition forces; primarily U. S. , led to Second Persian Gulf War (The Columbia Electronic Encyclopedia, 2012). The second war was based off of Hussein's anger towards the West and ongoing conflict was inevitable from the outcome of the first war. For these reasons, it is established that the aftermath of the war had a major effect on Iraq and the Middle East.Even the most superficial investigation of the war produces the major effects of the war on the Middle East. The weight of public opinion is relied on the fact that most Middle Easterners suffered from the outcome of the w ar. Kettle (n. D. ) argues ‘Both Kuwait and Iraq†¦ Would have to face a period of turbulence and instability†¦ Both have had their political integrity and independence, as well as their economy and civilian structures, seriously undermined†¦ ‘. The quote conveniently provides the long term effects of the two nations, but has also affected the whole of the MiddleEast. It is argued that the Middle East has been seen by the West as a permanent battleground. The effects had on the Middle East have even been solely blamed on themselves. Authors Beverly Milton Edwards and Peter Handkerchief (2007, up. 97) collectively argue ‘one recurring theme in academic discourses is that contemporary observers, especially governmental ones, should have anticipated the invasion'. The outcome and aftermath have proved the adversity that the Middle Easterners have had to face, and the way they have responded in the past.As the same time, it is argued that this war has add ed to the Arab-Israeli conflict. The Persian Gulf War led to overall instability within the Middle East, and it is because of this that there have been effects on the Arab-Israeli conflict. Conclusively, the war had a more of an impact on societies within the Middle East. In conclusion, the First Gulf War has led to ongoing conflict between the Middle East and the West in modern history. The war caused political, social and economic conflict between the nations involved in the war.